Bakgrunn og aktiviteter
Olav Bolland er professor og instituttleder ved Norges teknisk-naturvitenskapelige universitet – NTNU. Energi, termisk kraftproduksjon og CO2-fangst.
Arbeidsområder
Termisk kraft/varme; gass- og dampturbiner, CO2 fangst, partikkelteknikk, tørking
Leder Inst. for energi- og prosessteknikk, 2009-
Lenker:
Vitenskapelig, faglig og kunstnerisk arbeid
Et utvalg av nyere tidsskriftspublikasjoner, kunstneriske produksjoner, bok, inklusiv bokdeler og rapport-del. Se alle publikasjoner i databasen
Tidsskriftspublikasjoner
- (2015) Load-following performance of IGCC with integrated CO<sub>2</sub> capture using SEWGS pre-combustion technology. International Journal of Greenhouse Gas Control. vol. 35.
- (2015) Evaluating Pressure Swing Adsorption as a CO2 separation technique in coal-fired power plants. International Journal of Greenhouse Gas Control. vol. 39.
- (2014) Operability of Integrated Gasification Combined Cycle Power Plant with SEWGS Technology for Pre-combustion CO2 Capture. Energy Procedia. vol. 63.
- (2014) A CO2 Capture Technology Using Multi-walled Carbon Nanotubes with Polyaspartamide Surfactant. Energy Procedia. vol. 63.
- (2014) Weight and power optimization of steam bottoming cycle for offshore oil and gas installations. Energy. vol. 76.
- (2014) Assessment of mass transfer correlations in rate-based modeling of a large-scale CO2 capture with MEA. International Journal of Greenhouse Gas Control. vol. 26.
- (2014) Simulation of Post-combustion CO2 Capture System Using New Effective Interfacial Area Correlation. Energy Procedia. vol. 51.
- (2014) Full-plant analysis of a PSA CO2 capture unit integrated in coalfired power plants: post- and pre-combustion scenarios. Energy Procedia. vol. 63.
- (2013) Double loop circulating fluidized bed reactor system for two reaction processes, based on pneumatically controlled divided loop-seals and bottom extraction/lift. Powder Technology. vol. 246.
- (2013) Comparison of Costs for Natural gas Power Generation with CO2 Capture ☆. Energy Procedia. vol. 37.
- (2013) Design and off-design simulations of combined cycles for offshore oil and gas installations. Applied Thermal Engineering. vol. 54 (1).
- (2013) Cost and energy sensitivity analysis of absorber design in CO2 capture with MEA. International Journal of Greenhouse Gas Control. vol. 19.
- (2013) Validation of mass transfer correlations for CO2 absorption with MEA using pilot data. International Journal of Greenhouse Gas Control. vol. 19.
- (2013) Integration of low-temperature transcritical CO2 Rankine cycle in natural gas-fired combined cycle (NGCC) with post-combustion CO2 capture. International Journal of Greenhouse Gas Control. vol. 12.
- (2012) Optimized process configurations of post-combustion CO2 capture for natural-gas-fired power plant - Power plant efficiency analysis. International Journal of Greenhouse Gas Control. vol. 8.
- (2012) Hydrodynamic viability of chemical looping processes by means of cold flow model investigation. Applied Energy. vol. 97.
- (2012) Design-point and part-load considerations for Natural Gas Combined Cycle plants with post combustion capture. International Journal of Greenhouse Gas Control. vol. 11.
- (2012) Design criteria and optimization of heat recovery steam cycles for integrated reforming combined cycles with CO2 capture. Applied Energy. vol. 92.
- (2012) Steam bottoming cycles offshore - Challenges and possibilities. Journal of Power Technologies. vol. 92 (3).
- (2012) Review of design correlations for CO2 absorption into MEA using structured packings. International Journal of Greenhouse Gas Control. vol. 9.